-
**Describe the bug**
After leaving the device running for several hours (somewhere between 2-5 hours) the control board started generating incorrect motor signals. During the several hours the device…
-
I’m working on a project where I need to control the onboard RGB LED (e.g., the one in the GPS module) during certain phases of flight, such as during a drone show. Is there any existing feature in MA…
-
Hi,
I received a new board from Mellow, everything is working exept the servo out for BL/3DTouch.
The 3DTouch successfully respond on chitu3d controller.
I tried the last marlin release on your …
-
Any idea on how to dim the screen ? any documentation ?
-
**Describe the bug**
Accessing the GPIO functionality on a Raspberry Pi4 is hindered by some special behaviour, that seems to be NixOS specific: `/proc/cpuinfo` is missing the hardware revision, and …
-
Hello,
Thanks for your works .
I have a reolink RLN8-410(hardware version:N2MB02 or H3MB18)
It does not start up successfully after powering up
I can putty to nvr,and this below is the output…
-
Not a unit test, requires PWM services to exist.
Testing with colcon test results in the test hanging without external intervention.
Hangs due to call to servo_srv.wait_for_service()
-
Not sure what is causing this at the moment, I've had a file stop mid print twice now, but it stopped in two different areas it appears. I've also managed to get through this print 1 time in between t…
-
**Is your feature request related to a problem? Please describe.**
PWM configured the same way via the devicetree as for `efr32mg_sltb004a` for a custom board based on `EZR32HG220F64` does not work.
…
-
Hey!
Nice work on all the firmware man! I really enjoy using them. I just can't get GPS to work with betaflight right now. I tried in the CLI and it just says unavailable.
I think the potential sol…