-
### Describe the bug
In MANUAL ELEC mode, when pushing AC TIE 1 button, Left EMERG bus remains de-energized. Resets by cycling EMERG PWR switch
### Steps to reproduce
Ground
BAT ON
Ground PWR ON…
-
In order to enable VMID for playback/recording using the 2x 50k ohm voltage divider 8:7 should be 01 not 11. That is the 5k divider for 'fast start', (whatever that is.)
![image](https://github.co…
-
### Description of Issue/Question
Hello.
I'm using netmiko to do some network automation on Extreme ERS devices. As my fleet of equipment is made out of more than 300 switches, reducing the exec…
-
**Is your feature request related to a problem? Please describe.**
I have not yet built SS2K, but since I had an esp32 lying around, I would give it shot for testing. I've noticed that there isn't su…
-
Rev A4 Board with firmware+library 0.3.2 does not turn off when PWR is switched from 1 to 0 with USB connected.
1. Set PWR to 1
2. Use parallax.py library from 0.3.4 branch's library folder if yo…
-
I think we should discuss this before moving forward. I'd like to do a basic audit of what data is available in the PWR web services to ensure we'll have decent maps for parks going forward. I'm speci…
-
Hi,
quick question: Why did you use pulldown-resistors on the signal lines? To my understanding, pull-up/down-Resistoirs make sure your device has a steady state ... which in this case should rather …
-
The HP Microserver Gen10 currently does not boot unless ACPI is disabled.
Since new ACPI testing images were made available I wanted to see if those fixed the issue.
Sadly the issue is still present…
wiedi updated
5 years ago
-
Hello!
I would like to know what does PWR_EN do on GPIO22? How did I understand this display power management?
![1](https://user-images.githubusercontent.com/9757485/225323291-ad6f6813-4d30-44f1-83b…
-
Hello,
I have been using this library on the Lilygo T-Deck and it works great. I also created a tft_config.py which I have added below in case it could be added to the repo:
```py
""" LilyGo T-…