-
Hey !
I have successfully started Raspbian in QEMU with this command :
```bash
sudo /usr/local/bin/qemu-system-aarch64 -M raspi3 -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_…
-
With current oref0@dev and Dexcom G4 connected to USB (`CGM=G4-upload`) I get the following stack trace.
```
$ cd ~/myopens-cgm-loop
$ openaps extras
cgm://JSON/nightscout_calibrations/monitor/c…
-
Hi there, you guys are doing a really great job, and I want to know if I use raspi-zero2w (zero2w is cheaper), the os images and code can be used directly? Whether all raspi supports the uvc-gadget?
…
-
I'm trying to create a pdf from a csv using `glabels-3-batch` . It works great on my Ubuntu desktop but running on a RasPi3 the batch command hangs.
I'm running the version from the debian stretch…
-
*MikePetullo:*
I am interested in running a Raspberry Pi 3 OpenWrt image (built from commit 7ec092e6) in QEMU. My aim is to perform some testing of custom-built images before shipment. I am close to…
-
このチュートリアルを教材に通常の大学の授業で講義をしようとすると、1 コマの授業の中で機材準備からデモ、困ってる生徒の対応、最後に後片付けなどまで全てやらなければならず、なかなかスピーディーに進行できない。
学生と同じ配線をその場でやると時間かかったりミスったりして死ねるので、4~6 ピン連結のジャンパーケーブル数本を Raspi とブレッドボードを繋ぐだけでチュートリアルに出てくるものと回…
-
-
**System setup:**
RPi 3 with current Raspbian Buster
Realtek RTL2838 USB adapter (EZCAP EzTV-668 RTL2832U / FC0013 USB DVB-T)
rtl-sdr 11/1/2020 (installed today from git://git.osmocom.org/rtl-sdr.g…
-
HI,
I'm using the new release 1.29.
Sending a SignalK PUT with Node-red cause an error reported in the subject.
It happened with both mode 0 or 1.
It works, the regulators switched ON or OFF, but …
-
To make it easier for maintainers to publish new releases, a github action release workflow should be added.
Notes:
Github Release Management Docs: https://docs.github.com/en/repositories/releasi…