-
_From @agherzan on June 8, 2016 15:50_
# Description
Update code on a provisioned device using Resin CLI _`resin sync`_ command
# Steps to reproduce issue
1. Install resin cli with _`npm i -g resin-c…
-
See ~~https://github.com/resin-os/meta-resin/issues/478~~ https://github.com/resin-os/meta-resin/issues/608
Waiting on ResinOS to expose this in the boot partition (or for the ability to read hosta…
-
The http://docs.resin.io/#/pages/hardware/meta-resin.md document needs information on the steps needed after the resin yocto layer was created.
We can generalise these steps in README.md (meta-resi…
-
Running `resin help device` gives
```
Usage: device
Use this command to show information about a single device.
Examples:
$ resin device 7cf02a6
```
and I was expecting it to als…
Page- updated
4 years ago
-
- Resin
- PVC
- Pipe plug
- Pipe tape
- Screws for solar panel
-
### Version
Version 2.4.0+win64
### Operating system type + version
- Microsoft Windows 10 Pro
- Version 10.0.19043 Build 19043
### 3D printer brand / version + firmware version (if kno…
-
It seems that the combination of udev and `network_mode: host` causes cellular modems to be replugged after a container restart, which often will result in the modem never reconnecting.
The recomme…
-
When we attempted to use this recipe the logs contained a warning for each log we watch:
---- Begin output of le follow /var/log/chef.custom.log ----
STDOUT: STDERR:
WARNING: The "ssl" module is not…
-
We already do that in board specific repos, such as https://github.com/resin-os/resin-allwinner/blob/master/layers/meta-resin-allwinner/recipes-kernel/linux/linux-mainline_%25.bbappend#L40-L47 and htt…
-
Often, parts designed for FDM printers come with a *fudge factor* for more precise inner diameters and bridging.
If I print ERCF parts with a resin printer, will they fit together or are too loose or…