-
I have quite a few Telldus / Proove EWT0006 type remote controls
and I have two Sonoff RF Bridge R2 V2.2
This is the code for the remote control buttons:
1 ON
`20;4D;NewKaku;ID=02594ff2;SWIT…
-
Are you planning to add a door lock to the supported types of the plugin? I have a remote (868 MHz) with two buttons to open two separate doors. I haven't seen any other option/plugin to add them to H…
-
Hi.
Perhaps anybody can help me further.
I planned to use rflink32 with MQTT for sending COCO/KIKA signals.
But after setting up the rflink32 using the web interface, only data is received.
But I …
-
Did you have firmware for this board ?
fab33 updated
6 years ago
-
My maplin weather station reports humidity as decimal. This appears to be correct as per the rflink protocol reference. HUM=99 => Humidity (decimal value: 0-100 to indicate relative humidity in %)
I …
-
I have tried to do the hardware mod, and then I flashed RFLink32. Not sure if there is a way to check if the hardware direct hack works?
Anyway, I see the signals coming in, but they are not being …
-
My device appears to be seeing RF traffic based on the logs but its not publishing to MQTT. The only thing I can see in the logs that speaks to any issues is the following line
```
Jan 24 14:54:2…
-
Hi,
since with every reboot of Raspberry(belive it is the same with other UNIX systems) the USB port assignments are jepardized if several serial devices are attached. Like /dev/ttyUSB0 can be /dev…
-
I have a lot of "java.io.ioexception: underlying input stream returned zero bytes" in the openhab log.
I have tried to add this to the code after opening the serial port to avoid it timing out when…
-
This is some BIG feature : being able to have a status on the RTS Shutter objects.
This means :
- having a feedback status on the Shutter position (like : 50% on the OpenHab Shutter Thing Channel w…