-
**Problem**
I have tried to index an example project (uart_echo_rs485) without success. Here are the steps to reproduce (${IDF_PATH} is where the release/v4.3 have been cloned and installed):
```
…
grobx updated
2 weeks ago
-
Hi
first thank you for your great work.
But i have a problem that i could not use the rs485 because of a gpio conflict:
`root@raspberrypi4:~# dmesg | grep -i '\(can\|spi\)
[ 4.428624] p…
-
Connect the anemometer to a Atmega328p and get data from it
- [x] Research
- [x] Communicate with the device using UART. (not getting any response)
- [x] Documentation
-
Hi,
I have no /dev/can0 , only a can0 Interface. So I can't setup a sllcan0?
The 'candump -tz can0' is running.
BG
-
Do you have any advance in - "Pylon RS485 output" ?
My goal is to connect Daly BMS to PI device together with Growatt Inverter to the same PI device and send SoC from Daly to Growatt.
-
Hey,
it looks like some code nmay be missing here? I am looking for something to replace the very basic controller that comes with the sauna oven.
-
Hi,
first of all I describe the system configuration.
there is a StorEdge connected electrically to a PV system and to a LG RESU CHEM battery.
On StorEdge, the RS485-1 is connected to LG storage…
-
### Describe the bug
Core 2024.8.2
Supervisor 2024.08.0
Operating System 13.0
Frontend 20240809.0
Add on no longer works, entities blank.
If removed and reinstalled an unknown error occurs.
…
-
### Describe the bug
Unsure where the issue lies (hardware, kernel or pyserial), but the RTS pin on the RPI seems to be able to get locked into a state that can only be recovered from by rebooting.
…
-
## libmodbus version
all
## OS and/or distribution
OpenWrt 21.02, Linux 5.4
## Environment
arm 32-bit
sc16is752 UART
## Description
It is not enough to to set the SER_RS485…