-
As titled, if I put the IP address in the config, go2rtc is able to find the rtsp stream, however using [hostname].local doesn't work. Note that avahi-daemon is running and I am able to ping that host…
-
Per [go2rtc](https://github.com/AlexxIT/go2rtc)
> webrtc will use port 8555 (TCP/UDP) for connections
This chart needs webrtc TCP and UDP exposed by the service like RTSP was exposed in this PR …
-
Hi, do you have plan to include RTMP input support along with webrtc and rtsp?
Looking forward to hearing from you ~
Thank you ~
-
Hi @notedit , thank for your work, your code helps people who are new to streaming like me a big step forward.
With source as TestSource, FileSource; your code works perfectly, however with the sourc…
-
## Bug Report
### Description
I have noticed that while using the Android version of the application, it stuggles to show 15fps webcams and the overall GUI seems rather choppy. When viewing the e…
-
Hi,
I'm using go2rtc (v1.8.5) from frigate (dev) with an
- Annke C800 (only support H265)
- flashed with HIKVISION firmware V5.7.15 build 240201 (_to test if this firmware would allow using a d…
-
I hope someone can help me, I have Frigate installed in a docker container and I can see all my camera's in the Frigate Webui and home assistant. but I can't connect to the rtsp feed that go2rtc via V…
-
As far as I understand audio and video should both be active when using the WebRTC Camera Card as both media types are standard, but there is no audio. When I open the stream in VLC I have both audio …
-
## Describe the feature
Description
Each RTP packet sent invokes the io.Write function once, and a frame of video generates many RTP packets. From the pprof, it can be observed that RTP transm…
-
**Checklist:**
- [x] I updated to the latest version available
- [x] I cleared the cache of my browser
**Release with the issue:**
5.2.0
**Last working release (if known):**
**Browser …