-
**Describe the problem you have/What new integration you would like**
I would like to see MQTT client support for ESPHome on the Raspberry Pi Pico W platform.
The existing MQTT client only…
-
```
In file included from /Users/simos/Documents/Arduino/libraries/Sensirion_Gadget_BLE_Arduino_Lib/src/AdvertisementHeader.h:34,
from /Users/simos/Documents/Arduino/libraries/Sensi…
-
### The problem
Hi
I am using ESP32 (nodemcu-32s) and TSL2561 through i2c, and trying to use MQTT to publish sensor data.
When I flash my ESP32 it seems to be stuck in some kind of dead loop (which…
-
Hi @marianux
thank you very much for the great ECG kit, it helped me a lot during my PhD.
I tried to run QRS detection using ECGkit (latest version) in MATLAB R2021b on Ubuntu 20.04 but I got an …
-
-
Found a awesome DAC from DFrobot, it is the first i2C device that i have found that outputs a 0-10v signal. also has 8 possible i2c addresses. i am a failure at programming so hoping this is universal…
-
The dashboard scrubber should be updated to work in live mode, where the total number of steps is not known in advance since it's endless. This can implemented in a way similar to the one used by You…
-
## Description
G'day,
This one took me a while to investigate in a project so thought I'd report here in case it helps someone else.
When a block wrapped widget contains text with a null characte…
-
https://github.com/neu-rah/ArduinoMenu/blob/master/src/menuIo.h#L165
The use of "assert" in this library on MCU I think is problematic ...
But it do not compile for wemos on platformio:
xtensa-…
-
### PROBLEM DESCRIPTION
scd30 sensor with ESP826 Wemos is not detected on Power cycle. The scd30 sensor is detected and readings are available on `restart 1`
### REQUESTED INFORMATION
_Mak…