-
In this issue planned improvements for the board revision 1.0.x are stored:
Schematic topics:
- [x] Add a on/off switch
- [x] ~~remove USB Plug cut out and use a receptacle that is mounted on to…
-
Because the V1 works but for small currents only and the V2 failed, I'm considering a new approach:
1. Use 4S 18650 to achieve 12.8 - 16.8 V which could then be connected to a much more efficient b…
-
New content:
- [ ] Dungeon making improvements
- [ ] Rift configuration GUI (on the rift connection tool)
- [x] /saveschem command
- [ ] Better pocket info commands
- [ ] Make a system fo…
-
Hello guys.
Will it be release some code, libraries, guides, examples, schematics, and other files for Wink Robot, just like you did for Ringo Robot?
All the best,
-
-
This seems strange to me. Doing some continuity testing, if I remove the neopixel power jumper the left two pins (NPWR to on-board 5V) are still electrically connected. As shipped the jumper is instal…
-
I want to ask more about NCN5121.
You design not mention in the datasheet. So in your design use are using external 3.3v to power the chip and not using any of LDO and on chip DC/DC. And the ground f…
-
Potential Charge Controller 1 (More Advanced, and for higher power apps I believe)
[bq24030 Lithium ion Charge and system power path management IC.pdf](https://github.com/callahan248/ARPWave-V2.0/fil…
-
-
In my current understanding, `.vox` format (and it's unnecessarily complex and not well documented) is **limited in size** while 3D Coat's Raw Voxel stores floating point values for their surface gene…