-
Hi,
as I would like to use hsdaoh for MISRC the questions is: Is libhsdaoh going to be a general-purpose library designed for handling the data produced by the hsdaoh FPGA code and interfacing the HD…
-
1. Stratux version: v1.6r1-eu029
2. Stratux config:
SDR
- [ ] single
- [x] dual
GPS
- [x] yes
- [ ] no
type:
TTGO T-Beam ESP32 868MHz LoRaWAN NEO-M…
-
Not really an issue so much as wanting to reach out and maybe get involved if possible.
Long story short I'm trying to put together a package to build a LoRaWAN gateway using cheaper parts than the…
-
After extracting, and then re-inserting an AMC on an ATCA Blade (the ATCA Blade is not extracted), the Inventory RDRs are no longer visible. In fact, ALL of the Sensor RDRs are also no longer visible…
-
I try to get ethernet with u-boot (goal is to tftp).
It seems to crash when auto negociate the link. Any advice ?
I join defconfig and dts i modified for u-boot, inspired by the linux ones. I have …
F5OEO updated
2 years ago
-
Dear Developers,
We are using GNSS-SDR with a USRP X310 operated in common clock and common antenna with a geodetic receiver. Antenna is geodetic grade and external clock is a frequency standard.
…
-
Hii @JiaoXianjun ,
First of all your work you put here is very helpfull and great. I was trying to modify something for my testing purpose I highly appreciate any help from you or your team.
I use…
-
In my setup I need the maximum gain to receive a signal. The airspy AGC doesn't increase the gain in my case, so I need the use the manual gain.
-
The lead broke mid QSO attempt. In the end, the leads should be more securely routed under the board.
, the Inventory RDRs are no longer visible. In fact, ALL of the Sensor RDRs are also no longer visib…