-
i believe it might be the 'sledOnline' parameter, but i cant figure out how to change it
-
Flash firmware works by sending unlock instructions to the device, then setting up a standard HTTP server, and then sending the server address to the device.The device will go to the HTTP server and r…
-
Hi,
at first thank you very much for the project. I was just thinking about a diy sous vide solution and then found this project.
From your experience ... does it have to switch the relais very …
-
For some reason, the script was not working on a Mini (I think R1? I got it a long time ago) running firmware 3.7.6.
I was able to get it working by completely removing the "deviceid" from the body v…
-
Has anyone confirmed if this Zigbee coordinator firmware updater image from @walthowd is compatible with ITead’s new “Sonoff Zigbee 3.0 USB Dongle Plus V2” model “ZBDongle-E” based on Silicon Labs EFR…
Hedda updated
2 years ago
-
Hello.
I've a Sonoff Mini with 3.3.0 firmware installed, the latest version of Sonoff_Devices_DIY_Tools
on a Windows 10 phisical machine.
When I run the tool, my device is detected. However, wh…
-
I've brick'd 6 switches, because I can't get a notice in the tool.
I'm on latest version of Windows 10, and I don't have mDNS. I don't have Itunes installed because I don't need it. I don't the…
-
Hello @AlexxIT
First off, thanks for the work on this integration!
I see quite a few past issues about power reports and so on, and I hope I've covered my bases here!
I'm using auto mode, …
-
Per your email request for an issue to be opened. Add a way to pause the script when a user wants to manually control the fan speed with remote.
-
Ciao! Sorry for my english, I use google translator:
I have a Sonoff mini R2 with firmware 3.7.6, I tried OTA mode without success, I see it in my internet network with IP address, I use rester with …