-
## Task description
Check the possibility of setting the option bytes automatically at the end of the test.
## Definition of Done
- [ ] feature added and tested
cc @valegagge @marcoaccame @mag…
-
I noticed today that various peripherals on the vehicle I am doing bringup on were actuating upon power-on, for about 527ms.
Most well-behaved servo devices ignore this, because it is not modulatin…
-
Trying to filter for arb ID 0x700 and still receiving all messages when I call `can1.receive0(msg)` later on
Have tried this
```
let arb_id = StandardId::new(0x700 as u16).unwrap().into();
let …
-
hosted: STM32F4
slave: esp32c3
IDE:MDK(AC6)
After successfully testing the WiFi connection issues post MDK porting, including WPA2 and WPA3, I encountered a problem during the WiFi scanning funct…
-
-
**Describe the bug**
When using the new and old USB device stack ECM class on STM32H7 the assertion is raised due to mutex usage within ISR.
**To Reproduce**
Steps to reproduce the behavior:
1. …
-
**Describe the bug**
The speed for the I2C5 peripheral is always ~16.8kHz and not the expected 100kHz on the Nucleo-H723ZG board and possibly other H7 variants. It does not change for different value…
-
I'm not sure if this is the right place to post, as this concerns many of the stm32-rs projects and not just this one. It has bothered me for a while that the PAC crate is named `stm32f1` while the HA…
-
Hi,
I am trying to run your AvrAdcLogger example code. But whenever I run the code I am getting the error **"sd.begin failed"**, but when I uploaded the ReadWrite example code from Arduino IDE it w…
-
Hi,
I'm trying to get working Nuttx 10.3.0 on NUCLEO-L4R5ZI.
I'm stuck on SDIO interface. (Clock setup works, serial communication works).
I've based my work on the stm32l4r9ai-disco, as it seams…
qbazd updated
2 years ago