-
Hi Georg,
I cloned 123b622 and tried to follow the instructions [here](https://github.com/gicking/STM8_templates/wiki/Building-Examples). I'd like to share some of my observations, some problems I …
-
Hi http://s.aliexpress.com/nEbiQZNz?fromSns=Not
I can use this module with arduino uno. Thank you
-
Hi,
This is just a short note - ST has released two brand new STM8 Nucleo boards - one with the stm8l152r8 chip and the second one with the stm8s208RB. Both of these can make excellent targets for st…
-
Just a very minor find:
Here .../TG9541/stm8ef/releases under the "STM8L-Discovery" there is a link to the LCD-DISCOVERY/README.md. which links to the stm8ef/XY-PWM/README.md. Not an issue at all. I…
-
It would be useful to be able to access and modify the option bytes using stm8gal. Especially the ROP (read out protection) bit for unlocking a locked MCU is important.
-
It seems, currently the STM8 is supported via the non-free IAR and Raisonance compilers only.
The free C compiler SDCC supports STM8 since the 3.4.0 release in 2014.
Philipp
-
maybe? unsigned char LedsArray[NB_LEDS] -> unsigned char LedsArray[NB_LEDS*3];
-
The stm8l.h having wrong address definitions at least in the part related to MCU clock configuration registers.
New _.h files have to be created. The info for that have to be taken from STM8S003F3 da…
-
Found another one. Unless the stm8l152 I am working with is a reversed bit order the order of control bits is revered in your definition. This affects other registers as well.
Timer 3 is working f…
-
_Line 269: TIM1.CR1.reg.CEN = 1; // start the timer_
Should this be TIM3 maybe? Not sure I am trying to use your code with a STM8L152 maybe its different :)