-
I'm using the latest commit 00998b5 with Meshtastic firmware 2.0.22. It seems the `SX126x::findChip()` function is recognizing my module as an SX1261, although according to the [datasheet](https://doc…
-
First of all, Thank you very much for writing such extensive library consisting of all radio modules. it helps a lot to people like me with little programming knowledge.
Issue : I have enable addre…
-
Hello,
First of all, thanks for the amazing work.
I have a Heltec LoRa v3 board, and the iGate function is working as expected. However I can't get the internal battery voltage shown in the beacon…
7deve updated
5 months ago
-
Two new nodes: Heltec-V3 and WisBlock both with latest FW.
Heltec is Client with Neighbors turned On, WisBlock is Router_Client.
Heltec displays on Map but no Neighbors are showing up that saw H…
-
### How to Get Data/Bit Rate in SX1280 in FLRC Mode
I have Used SX1268, where I can use radio.getDataRate() to get the Data Transmit Rate, but when I use it for SX1280 FLRC Modem compile show error m…
-
Hi,
Can you please tell why the SF 5, 6 are not compatible with SX1261/2 chips? Is there a different whitening sequence that they use or am I missing something?
-
https://github.com/RIOT-OS/RIOT/blob/09b98ea4fcb54ecd8e979b15f11478359e250056/drivers/sx126x/sx126x_netdev.c#L400
-
**IMPORTANT: Before submitting an issue, please check the following:**
1. **Read [CONTRIBUTING.md](https://github.com/jgromes/RadioLib/blob/master/CONTRIBUTING.md)!** Issues that do not follow this d…
-
Fantastic project. Thanks all support. Using the sx1262 /B v1.1 chip from Nice-RF. The radio can be successfully enabled using board: 5 --> Custom ESP32 Wroom + SX126x (Crystal). However, this sx…
-
Good day, this is not issue =)
First thanks for great SW for Lora APRS/IGATE.
I am using version 4.0.1 for my custom Esp32 + SX1268 board for tracker and digi igate
So question, can you update sou…