-
The [docs](https://github.com/CityofToronto/bdit_data-sources/blob/master/volumes/miovision/README.md#classifications) say:
> Approach level bicycle counts should be used for the large majority of a…
-
I have a new SKR 2 rev B board and 5 BTT TMC2208 v3 stepsticks - I am getting "TMC CONNECTION ERROR" from the display at boot up, and M122 just shows:
Testing X connection... Error: All LOW
…
-
I am running a 5161 on an ESP32, I am getting '0 1 292' and the motor is not moving, this is what i have wired
EN_PIN -> 14
MOSI ->MOSI
SCK -> SCK
CS -> SS (i have tryied Salve Select and a non-…
-
### Describe the bug
TMC allows for not defining a pod selector to apply a network policy to which in turn means it applies to all pods in the relevant namespace/workspace. the TMC resource requires …
-
My mini CNC mill has been working great with Remora firmware running on a Bigtreetech SKR V1.4 with TMC2209 drivers. The host is a Raspberry pi 4 Model B. Optional serial debug interface is also conne…
-
I would like to monitor the torque output of a stepper motor driven by TMC2209.
I tried to read the stallguard values from TMC 2209 using the provided example - StallGuard_TMC2209.ino.
However, the…
-
Please provide feedback for the course below. Thanks so much for your feedback and contributions!
-
Please provide feedback for the course below. Thanks so much for your feedback and contributions!
Nothing to complain here, one thing that'd be great though would be a faux gui demo or a link to a la…
-
When adding the TMC plugin to Netbeans, the URL http://update.testmycode.net/tmc-netbeans_test/updates.xml times out. Is it down? Was working on the same machine before.
-
with SB2240 after 20/30 minutes of printing I get the error 'tmc "extruder" reports error : GSTAT: 00000004 uv_cp=1 (undervoltage!)
(Ldo nema 14 pancake run_current: 0.65)
both motor and board are…