-
**Describe the bug**
I have USB to Lan adapter from TP link [https://tinyurl.com/kptfvtrp](link) which used to work perfectly fine around 6-8 months ago in Ubuntu Server 20.04 running Raspberry PI 4…
-
I'd like to have a log.zig logFn that I could use to emit debug logs over USB, rather than UART.
Currently Microzig has support for acting as a USB HID device. I believe emitting debug logs over US…
-
### Related area
I would like to have tinyUSB support USB Host on ESP32-S3
### Hardware specification
ESP32-S3
### Is your feature request related to a problem?
I have USB MIDI Host working under…
-
Hello everyone
I am currently creating a jtagice3_*** compatible firmware that works with the AVR-DU series. It can be recognized as USB-HID + USB-CDC using only the standard drivers for Windows an…
-
I was using attachCoreTimerService to add an interrupt to my sketch.
The attached interrupt appears to be starving the USB interrupt. To see the effect add a delayMicroseconds(350); into your att…
-
Anker PowerExpand+ 7-in-1 USB-C PD
https://www.amazon.co.jp/dp/B07RRWZHL6
```
Bus 002 Device 007: ID 0bda:8153 Realtek Semiconductor Corp. USB 10/100/1000 LAN
Device Descriptor:
bLength …
-
### Board
ESP32 S3 dev
ESP32 S3 DevKitC 1 N16R8 ESP32 S3 WROOM1 N16R8 Entwicklungsboard WiFi Bluetooth 5.0 Mesh Entwicklungsboard https://amzn.eu/d/iAX62Sv
### Device Description
esp32-s3-…
-
Don´t know if this is still maintained here but i found some change in the Becker USB Stick.
My USB Device ordered 01 / 2024 has now lower case letters and so the Script is running into an error:
…
-
How can use Verilog/system-Verilog testbench to verify the function of USB device?
-
**Describe the problem:**
I've bought the DAPCat and tried to make it run under OpenOCD using the cmsis-dap interface but the device does not seem to be recognized as a CMSIS DAP device.
I tried t…