-
# ESP32-P4 support status in ESP-IDF
ESP-IDF v5.3, currently in development, will include initial support for the mass production version of the ESP32-P4 chip.
In the list below, supported featu…
-
HI. I have the same device - Daichi dw22-b ver-03 and i have a problem with connect it to computer. When connect it i get an error:
```shell
sudo dmesg
[ 2940.865999] usb 1-2-port2: Cannot enable. …
-
Hi,
is it possible to use g2core on an Arduino DUE and communicate with it with UART instead of USB?
I've already modified gShield-pinout.h: I've disabled USB, enabled UART and set/shifted some pi…
-
Hi!
First of all, I would like to congratulate and thank you for your help in developing the CP21x driver library for the Arduino. It was an impeccable job that inspired me to develop a similar libra…
-
Please link good USB-->UART driver for windows
-
Hi @malcolmmackay, your project seems very interesting to me and I wanted to ask if we can use any generic USB to UART bridge (FT232R/CH340/CP2104/PL2303) for programming the MSP430 with your programm…
-
Schönen guten Abend,
ich habe seit August 2021 die HB-RF-USB-2 in Kombination mit dem RPI-RF-MOD erfolgreich betrieben. Alles lief, bis auf Startschwierigkeiten (war wohl nicht geflashed von Smartk…
-
I tried doing this a few months back using a serial USB adapter instead of the UART but didn't get too far with it. I've just spent a couple of hours setting things up and got it working with my Pi4 a…
-
Any thought to bringing out UART (maybe from an FTDI?) or USB hub to allow for external USB connections as well? I imagine this could be a very handy micro computer to carry around to be able to flash…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…