-
Subscribe to this issue and stay notified about new [weekly trending repos in unknown languages](https://github.com/trending/unknown?since=weekly).
-
Is it correct that this is only for 5V fans?
I was looking for just a board like this, but for 12/24v fans.
-
Ministealthburner has an issue that the amount of play in the guidler is significant enough to cause issues when extruding. It could grab filament too weak for fast printing, and everything above 5mm³…
-
Some users have been experiencing melted carriages when using stealthburner
It may be limited to Dragon hotends (or it may not)
It happens even when using a sock.
It happens on a variety of ABS f…
-
When trying to get the make manuconfig under the installing katapult, it says there is not a file.
"pi@VoronTriZero:~/katapult $ make menuconfig
Makefile:139: out/board-link: No such file or direc…
-
### Which mod do you want to adopt?
https://github.com/VoronDesign/VoronUsers/tree/main/orphaned_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod
### Describe your plans for the mod
Would like to …
-
-
Hi, first of all, this toolhead is absolutely impressive and thank you for the hard work in designing it.
I really want to add it to my build, but I am using the BTT Ebb sb2209. Is this toolhead co…
-
Page 8 states
"ADDITIONAL TOOLS
We provide additional tool recommendations in
our sourcing guide. Visit https://vorondesign.com/
sourcing_guide and switch to the “Voron Tools”
tab at the bottom…
-
I'd like to remix [`Y-Chain_Bed-Mount_x1.stl`](https://github.com/thomasfjen/enderwire_nonpro/blob/main/STLs/Y-Axis/Y-Chain_Bed-Mount_x1.stl) to use a generic cable chain with "Igus" mounting holes (t…