-
### š Describe the bug
[E ProcessGroupNCCL.cpp:915] [Rank 0] NCCL watchdog thread terminated with exception: CUDA error: unspecified launch failure
Compile with `TORCH_USE_CUDA_DSA` to enable deviceā¦
-
Hi @jnthas , I build the project and flash it, but it run exceptionć
clockwise v1.4.1 and esd-idf v4.4.7
there are 2 issus:
1: NOT_FOUND log
```
[ 1060][V][Preferences.cpp:352] getUChar(): nā¦
-
An issue was raised on pico-feedback around the `watchdog_get_count()` never decrementing, see raspberrypi/pico-feedback#349. This was an issue with PlatformIO and the @earlephilhower Arduino core.
ā¦
-
would it be possible to get a feature that allows a watchdog to happen with the host system OS so in the event that the host stopped heart beating the PI-KVM could pull the power.
this would allow ā¦
-
**System**
- Motherboard: MSI X570-A PRO
- BIOS Version: 7C37vHM
- GPU: KFA2 RTX 2070
- [x] CSM is turned off.
- [x] 4G decoding is enabled.
- [x] UEFIPatch is applied without DSDT
- [x]ā¦
-
No matter what you do, you will get this error
-
I ran into the same problem as https://github.com/bkerler/mtkclient/issues/180
So i tried tag 1.9 to see if it would work but unfortunately it did not.
I get the following error message on 1.9 and tā¦
-
#170 added a watchdog command (`VR`) that is sent every 30s to ensure the radio is still alive. It seems that the XBee serial protocol can't handle this and the command times out, causing a restart. Iā¦
-
I have a few HP DL360/380 servers that I would like to use for CPU mining. None of them have a GPU. CPU mining is enabled. All servers are running in Client mode and report to Server correctly.
Rainbā¦
-
Watchdog implementation has been removed from #11
Watchdog needs more testing, should not be enabled by default and might (sooner or later) be a custom setting that can be enabled via esc-configuraā¦