-
I'm using sample from https://github.com/SmingHub/Sming/tree/develop/samples/Websocket_Client.
Running on ESP8266 Wemos D1 Mini Board.
-
![C1101 s2_mini_v1 0 0_4_16x9](https://github.com/chester4444/esp-multical21/assets/6534549/b8d284e6-dc3d-4639-9e8a-3b7bd75c5419)
Confirmed it is working with Wemos S2 Mini
[env:esp32]
framewor…
dkcsn updated
9 months ago
-
Followed the directions to install on the front page. I believe that all was done correctly.
Found in comments that we needed to install python 2.7. Installed python 2.7.18.
Donwgraded boards manag…
-
### The problem
Begin January 2023 I uploaded 5 new WEMOS S2 mini boards (Lolin v1) using ESPHome over USB via the "manual" mode. That alml worked fine, as long as I put the board in boot mode (press…
-
Trying to make NerdMiner v2 work with the ESP32-S3-Zero
ESP32-S3FH4R2
Dual Core 240 MHz
Built-in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM
Octal PSRAM
Specs here:
htt…
-
Please advise where I can find the shift register or how to alter the pins to match an arduino uno.
I'm using a WeMos D1 board and need the standard Arduino GPIO arrangement.
-
Hi,
first thanks for providing this library. Just in case someone else is struggeling with setting up and ADS with an ESP8266 or you want to slightly change your code to make it compatible with ESP8…
-
Some boards, like Wemos, use `Dxx` port labels on their boards but it is not equal to plain numbers of ports (`D7` on the board equals to `13`, which equals to `D13` in XOD IDE).
Reported on the fo…
-
Hi,
Is there a place where to buy ready to install hardware?
-
With both the current versions of mhp and esphome I can't compile the projects anymore.
Here's the config:
```
esphome:
name: klima_wintergarten
friendly_name: Klima Wintergarten
esp3…