-
Would it be possible to create distinct branches in the tibbo layers, to support at least the LTS Yocto releases?
Dunfell is coming to its end, so that would make `kirkstone` and `scarthgap` to maint…
-
I am trying to install yocto on Coral Dev Board using the meta-coral layer in Yocto Zeus.
I build the image successfully. Now I am trying to flash the coral board with generated Yocto Zeus.
To fla…
-
Hi!
I'm currently working with the evaluation board of the imx8mp SoC from NXP and Basler DAA2500-60mc Camera.
I have built the yocto images Zeus 5.4.70-2.3.2 and Hardknott 5.10.72-2.2.0 which inc…
acmIA updated
2 years ago
-
Running more than one machine using the same local sstate-cache is not efficient and we need to setup a local sstate mirror to be used in CI builds.
The PR https://github.com/quic-yocto/meta-qcom-h…
-
I am attempting to compile with added layers and I encountering errors.
bitbake-layers show-layers
NOTE: Starting bitbake server...
ERROR: Unable to start bitbake server
ERROR: Server log for t…
-
**Description:**
Issue:
Encountering a error during kernel uncompression on the Raspberry Pi 4 when utilizing the Scarthgap Yocto Release and meta-raspberrypi layer on the master branch. This issu…
-
Hi,
I stay trying build yocto dunfell to imx7d-pico based on that:https://hub.mender.io/t/technexion-pico-pi-imx7/136
and I stay with this issue: **ERROR: Layer openamp-layer is not compatible w…
-
All the reference seems to be about IMX6 in this meta layer. Is there meta layer for A38X? I found u-boot repo (https://github.com/SolidRun/u-boot) but I wasn't clear if there's any config needed to i…
-
Hi, I'm working with Poky Dunfell, on a yocto layer for an ARM device.
The image run properly, there are no issues on the build process at all.
But once the image it's flashed on a device it shows…
-
Hello, we have a problem with this layer. We use poky zeus and after we configure _bblayers.conf_ and _local.conf_ as described below, when booting the target system (zybo-zynq7) on serial we see this…