-
Would it be possible to support printers without a zprobe, by using a secondary serial port to monitor for zstop commands or triggers, then I could use a microcontroller and a probe to get a map for e…
-
Hi,
I just did a full update of everything, Klipper, and both of my MCU's and now using the same config as before, I get this error.
I really need to stop doing updates, everytime, it breaks som…
-
After a probe, the bit is placed on top of the surface. If you touch the wrong button it is scraped over the surface. It will be nicer to have a popup request "set Z to 0 ?" after touching the surface…
-
Hi bigthreetech
Ist it possible to provide the bl-touch firmwares with #define PROBE_OFFSET_WIZARD enabeld?
CAn be found in Configuration_adv.h
ty in advance.
-
Probuję wysłać przesyłkę przez API, metoda dostawy InPost paczkomaty - umowa własna, otrzymuje natomiast błąd
[{\"code\":\"INPOST_TRANSACTION_ERROR\",\"details\":\"internal_server_error\",\"message\…
-
#In your rev_hop function, you have the return to probe position inside your loop which is calling it every time.
That doesn't seem right unless I'm missing something?
I forked this project and mo…
-
Hello All,
I am trying to implement 0.91 z probing on a working corexy printer
# define DRIVE_SYSTEM 2
...that so far is working smoothly. Homing, and print movements are OK.
The probing parameters …
-
When I turn the printer on, the probe will deploy and retract properly, but after the probe deploys for homing, it doesn't retract, it just stays out. I have to manually force it back in.
I tried …
-
### Is your feature request related to a problem? Please describe.
The Ecubmaker Toy DIY 4-in-1 probe only functions when Zmax is always triggered but this interferes with probing and causes the prin…
-
When attempting to determine and set the probe z offset, I can not go negative in the "move axis" function, and when attempting to set the offset in directly, it does not move the gantry. As a result,…