-
Good day. after the firmware I wanted to activate wi-fi. Throws this error. Which is from BTT, which is from teamgloomy.
Can anyone understand what the problem is?
18:45:20.169 : No start signal d…
-
Finally got my SKR Mini E3 V2 installed after a few months of saving up for a BTT TFT35 (wanted to do the upgrade all at once) so the official BigTreeTech Store I purchased this from won't help me bec…
-
I uploaded the new firmware onto the board and the firmware onto the TFT3.5 installed the com-port.
The board shows up as a USB drive as well, which is probably the issue and it's blocking the TFT3…
-
I can't open the file "mks_tft28_v4. 0. SCH" in the "schematic" folder
Can you tell me how to open this file?
-
How do enable 1-wire on the BTT-Pi, specifcally for the DS18B20 sensor?
-
if you push the button to print from Onboard SD Card, it will stay in a load screen and you need to reboot the screen
i recommend to remove this button
-
Hi! I bought SKR1.4 Turbo + BTT-TFT24-V1.1 a while ago and used both to upgrade my Longer Lk4 Pro printer. I confess that I'm a layman and I don't understand much about these settings! I followed a vi…
-
BigTreeTech's video's and configs are already _far_ out of date due to rapid changes in Marlin bugfix2.0 branch.
BigTreeTech hasn't really kept up well with responding to issues here, and creating …
-
After moving from tap mechanical switch to Voron OptoTap PCB v2.4.1 5-24V, an electrical burning smell was evident.
opto tap indication red/blue was ok. i didn't select 5 or 24v pad at the back of th…
-
It looks like the two 3D models you provide are different from one another. If I align the two on top of each other items are not the same size and are slightly offset. Any chance you can provide a …