-
May I please get some help in configuring the ender3 v2 screen on the skr 2 board?
I've tried following this solution (https://github.com/MarlinFirmware/Configurations/issues/535#issuecomment-87301…
-
The onboard system bootloader (BOOT0 set high, BOOT1 set low) present on the STM3240xxx series only waits 780 microseconds for the crystal to start. The SKR Pro 1.1 comes with 22 pF capacitors that ov…
-
### Check Existing Issues
- [X] I have checked existing issues, and this issue is not a duplicate
### Description
The hidden menu bar used to be only as wide as needed to fit the hidden items. Now …
-
It would be good to know the max current you can draw from each port and especially the onboard voltages
For example:
1. Maximum current that can be drawn from all combined 12V ports that are fed fr…
-
I love the mac style gesture, and they all work fine with system gesture, like swipe to switch workspace. I'm using BetterTouchTool now, unfortunately, the BTT gesture conflicts with two finger swipe …
-
we need schematic files for this board to be open source. please upload this.
-
Hi,
I installed UPS 24V 1.0 module on a BIqu B1 that have a skr 1.4 board.
The wiring is correctly done and the frimware instruction followed correctly as well .
While printing, if I remove the …
-
After printing everything I need for my Voron 2.4 350, following guides and all, ever since I installed the shuttle for stealthchanger and installed my dragonburner on it, I'm having some really weird…
-
The pin assignment for PWM0 and PWM1 are reversed on the board. PWM0 (gpio16) belongs to fan1 and PWM1 (gpio17) belongs to fan0.
This should be adjusted in the documentation in the SB2040 cabling sec…
-
The core of the ESP8266 ESP-07S module in the slot BTT SKR2 VB boards - the printer is not recognized in the WIFI network.
What should i do? Please provide information step by step to change this.
M…
qulet updated
2 years ago