-
I believe that the decoding using SF12 is not successful. I am testing the code using RN2483 (waspmote module from libelium) and SX1276 with an arduino. Is there any known problem?
-
Hey, first of all I want to thank for all the amazing work. Your repo is amazing and I am thrilled to use it. Sadly my poor knowledge of digital signal processing lacks too many fundamentals to unders…
-
I tried the framesync64_example and everything worked Ok. So, I tired to actually use it to transmit some data. It says that it has a spectral efficiency of 0.8000 b/s/Hz which seems to mean with a 1…
-
I am using the following ESP32-s3 library on PlatformIO
https://github.com/tasmota/platform-espressif32/
However, even the example doesn't works fine on my ESP32-S3, with no error or warning.
I tri…
-
Implement decimation and interpolation on the Cortex-M4 to support sample rates lower than 8 Msps over USB. It probably isn't practical to support arbitrary decimation/interpolation rates, but half, …
-
When I run the rtl-sdr config file, the content of which is given in gnss-sdr.org, I get the following error. My laptop is able to recognise the sdr but I still get this error. Please help me with thi…
-
Hi I've been trying to spoof a Ublox C94 M8P receiver using USRP N210.
When transmitting the signals I can see satellites appearing in the u-center but it is for a very short time and only 1 or 2 svs…
-
when i plug-off the device, kernel error occurs.
and only after reboot, device is recognized.
```bash
uname -a
Linux XXXXXXX 5.4.0-124-generic #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022 x86_64 …
-
First - thanks to the authors and maintainers for a really excellent piece of software! This tool works great with a HackRF One and active multi-band GPS antenna to receive GPS L1 position fixes.
I…
-
Hi all, just paid yesterday at 13:56 to ss7.dev $1000 (got all the proof), nothing happened.
No answer, sent 3-4 emails to them and nobody came back.
In case you stumble upon this website, beware I…