-
OSCam does not show IP and Port if connectes via dvbapi networkmode.
See here:
https://db.tt/eTwysZoC
It is just cosmetic, but is there a reason to not show the corespdending values? In my case woul…
-
Due to performance issues, the server will be down for maintenance for a few days.
Manual downloads available at: http://synocommunity.com/packages/
-
Is oscam.dvbapi used when connecting in network mode?
I get connection to 098C but in oscam.dvbapi it ist prio:
P: 0D05 # prioritise CAID
D: 0D05 150 # wait 150 ms before wri…
-
I'm not sure is it plugin's or Oscam's issue, but I start here.
It seems like only initial tuning to channel received (or requested) CW from the Oscam. After about 20 second picture freeze and Oscam l…
-
If the dvbapi Plugin lose the Connection to the oscam Server, dvbapi doesn't automatically reconnect.
After switching the Channel, dvbapi works as expect again.
-
Dont know how to prove this but i have an old oscam which i built from source which has been running for ages, today i pulled a new tree, built this and then used the untouched scripts and same cards …
-
Hi,
i've disabled "Network Mode" because of "known Problems", but dvbapi does connect to the oscam Server anyway, via dvbapi.
> vdr01_64 ~ # grep dvbapi /etc/vdr/setup.conf
> dvbapi.LogLevel = 3
> d…
-
Hi.
dvbapi (1.0.6) works with HD+ germany.
dvbapi (1843&000000/0000/EF75/89:53B7D07C67AAFDA3D477E755D9C862A5): found (380 ms)
because of new card with CI, i have compiled the latest version dvbapi …
gligi updated
10 years ago
-
Hi
I thought someone could be interested in a FFdecsa big endian patch. So I post it here. I have tested it under openwrt ar71xx. To compile FFdecsa for big endian enviroments, simply define _BO_IS_B…
-
When you have more than one satellite fetched (Can be cable + satellite) is switching from one satellite to another channel, or switch cable to a satellite, it loses connection with Oscam so no more o…