-
When adjusting alpha on a pixel from the color picker it's quite easy to "whiff" the alpha bar and replace your current color with black because the SV box's area for some reason extends several pixel…
-
When creating tight angled slip lanes, the mod can't provide individual lights for these. I believe this is because CS2 isn't considering these lanes to be turn offs due to the angle but could be fi…
-
Got a tft28 ver 2 3.0.2 firmware with makerbase Wi-Fi and ramps 1.4 Marlin 1.1.8
Port baud rate 250000
Prints fine from sd card.
When I send a print job from a PC or phone, the job starts and…
-
I'm trying to setup mk4duo with my printer. I was able to do everything, only one issue that i have is when i'm doing autocalibration after homing it deploy pin, then moves to the middle and and start…
-
**Is your feature request related to a problem? Please describe.**
The difficulty of the Path of Ascension feature of the Kyrian covenant ramps up dramatically at the 4th tier. The third tier adds a …
-
In GitLab by @DillonJ on Dec 1, 2020, 07:20
Hi folks,
It has occurred to me that SpinePeriods could do a lot more to help us best exploit the flexibility we have in Spine. It is already creating tem…
-
I'd reason that bitCNY is very much not that.
-
**Title:** County Roads
**ID:** 6e13715a-86d6-4fe9-9a26-2824412527b2
**Description:** This line layer contains County road segments of all paved and unpaved roads, ramps, and bridges in the City of De…
-
Some armor blocks including slabs and the underside of slopes have problems with the texture which would normally continue between blocks but instead sharply cuts off between blocks.
Another thing …
-
Iv got a question about some strange happenings with my FT Cloner. I have a Folger Technologies Cloner. Its an Arduino Mega / Ramps 1.4 based Printer. It is flashed with the latest Repetier Firmware. …