-
As soon as I boot the BTT SKR3 EZ board I get a TMC Connection Error reading ALL HIGH on all axis regardless of the number of drivers installed.
I cannot move any of the steppers while this error is …
-
Need to understand how the encoder value from HARP H2 can be converted to a real-world angle.
-
### Wiki Search Terms
Motor, Axes, Motor issues, pretty much everything
### Controller Board
6-pack Universal
### Machine Description
Shapeoko 3XXL
![IMG_9752](https://github.com/user-…
-
### Wiki Search Terms
TNC driver not detected
### Controller Board
6-pack
### Machine Description
Dual Y, X, Z . Nema 17, 24v. TMC2130. x 6
### Input Circuits
_No response_
### Configuration …
-
### Wiki Search Terms
https://github.com/bdring/FluidNC/issues/1201
https://github.com/bdring/FluidNC/issues/1008
https://github.com/bdring/FluidNC/issues/1001
### Controller Board
![SCH_SCH_MAIN…
-
Hello , did somebody tried to use this library as motion controller mode.
Meaning that sending speed and destination via SPI and chip has full control motor ?
thanks a lot.
-
I work with an raspi pi 4 and astroberry. Up to now I am very satisfied. But two problems are left:
1. I cannot connect the raspi with my router speedport of german telecom.
2. I have an spectrograp…
-
I would like to use the ports, but I don't know what their pins are, I looked in the schematic and I didn't find.
![BIGTREETECH GTR V1 0](https://user-images.githubusercontent.com/1710671/148666245…
-
I've been using a scanner with my setup for quite some time now, but I noticed that compared to lots of other videos featuring a scanner or large stepper motor of some kind, mine sounds awful in compa…
-
Buenas, queriamos saber si este modulo para controlar el motor paso a paso esta bien... https://articulo.mercadolibre.com.ar/MLA-728430892-modulo-a4988-driver-pololu-3d-ramps-cnc-arduino-cdisipador-_J…