-
The problem is that during restart of the sonoff 4ch pro R2, the relays are turned on during the boot process. that is causing unwanted behavior with the garage door. Searched in the forums and find s…
-
**Have you look for this feature in other issues and in the wiki?**
- Yes, also the closed one.
**Is your feature request related to a problem? Please describe.**
_A clear and concise description…
-
Hi,
I just tried to connect a BH1750 amient light sensor to the Sonoff Basic module, but when reading the status 10 I just get the current time ....
OUTPUT:
STATUS10 = {"StatusSNS":{"Time":"2017-03…
-
Almost every night my T1 UK 3ch will lock up and turn all the lights on. It will remain unresponsive until power is removed and restored. This seems to be happening more frequently now. Previously it …
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem i…
-
Hello there,
I`m currently working on a project where i need to control the LED brightness with PWM through adafruit library. My issue is that i`m using this command here "set.setPWM (channelnum, …
-
Originally reported by: **Marek Forkasiewicz (Bitbucket: [fork04](https://bitbucket.org/fork04), GitHub: [fork04](https://github.com/fork04))**
----------------------------------------
lolin-ota - d…
-
Hello. Thank you for your library. I have question.
How can i using 2 sensors by one pair I2C pins? I know that i can setup 2 adress on sensor, by ADD pin, but how i can read data from both sensors…
-
My use-case: I connect whatever board (wemos/nodeMCU/plain arduino) to my PC and run `my-com -f` and the script puts together the sketch/board/port/baud/etc needed to flash.
For about a week I'm st…
-
Hello,
after flashing to 6.1.1 I experience the following issue on a sonoff TH:
With the mqtt topic set to "sonoff-x" or "sonoff-18" get a correct SENSOR message:
**19:02:14 MQT: tele/sonoff-…