-
Hii
Updated the Radio Lib on 29 Dec 2019.
Thanks for your support! Am getting ERROR State 707 with LORA SX1268 - With DORJI Development Board with arduino UNO only on the Receive Example
Same error…
-
**Describe the bug**
Reboots when I try to send a message via the meshtastic app.
**To Reproduce**
* Installed firmware-tbeam-ANZ-1.1.33.bin to a ttgo tbeam v1.1
* I then installed meshtas…
-
Hi,
As hardware configuraiton I have a custom board implementation of a nRF58232 in cobination with the SX1262 Radio.
As software I use the LoRaMac-node 4.4.4 release. Using the EU868 Region par…
-
Hardware setup:
Lolin32 -dev, sx1262 chip connected to the pins described below.
// ref: Library/Arduino15/packages/esp32/hardware/esp32/1.0.4/variants/lolin32/pins_arduino.h
// Pin connections L…
-
Hi @beegee-tokyo ,
According to your example and description, this repo can work on nRF52832 + SX126X, right?
If it is, i want to ask two questions please:
1. I think this repo can support nRF528…
-
Hi,
I am using a custom board with SX1262 with a SiLabs Gecko MCU and been successful in getting join/uplink/downlink etc. working very consistently with multiple units.
Now I am working on robu…
-
Hi,
I've been trying to successfully transmit a packet using the [SX126x_Transmit](https://github.com/jgromes/RadioLib/blob/master/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino) example. I ha…
-
**Describe the bug**
I'm not sure if this is a bug or I'm missing something. However, when I use the SX1262 module and try to setup a receving example, the begin returns an error code of -20. From wh…
-
Hello,
to start with I ordered and assembled the same Adafruit modules found on the photos on the RFQuack github site:
![494A5A58-01BD-43EA-80A2-702C1E1A7B7F_1_105_c](https://user-images.githubu…
-
Hey Im also taking a look at temperature compensation in narrow bandwidth modes.
Im seeing about 300Hz/Celsius drift with my RA-02.
Im thinking for using two loops to track the temperature drift iss…