-
Is it possible to specify multiple gateway servers?
I'd like to specify a particular IP for which server to connect to. The issue I am having, depending when I start pymultimonaprs it will connect t…
-
When selecting the TPMS or AIS demodulator modes, automatically set the frequency to the most likely (expected) value. This is to expedite reception by tuning the used frequency per the selected mode …
-
```
Catch packets from AGWPE and parse into valid APRS data.
Pass packets off to required classes.
```
Original issue reported on code.google.com by `ethanharstad` on 9 Jun 2010 at 9:35
- Blocked on:…
-
m/ looks up the position from the historydb (cache of last positions from the APRS-IS stream) based on the connected client's username, and the historydb only gets populated by packets accepted to the…
hessu updated
9 years ago
-
we may have a chance to know then how the message gots delivered (aprs, packet, dxcluster, psk31, cw) and also wo has delivered.
-
I'm having issues changing my symbol table to "\" (backslash) instead of the default "/" (slash). When I change it in pymultimonaprs.json, and run "sudo pymultimonaprs", it gives me an error: "ValueE…
-
```
During the KJ6KUV-11 flight, aprs.fi decoded the aprs packets correctly.
However, the section "stations heard by / stations which heard xxx" is missing
from the info page, see attached.
That se…
-
Hi
I been running pymultimonaprs for a couple of months now. its running on a Raspberry Pi with a Nooelec R820T based DVB-T - All of a sudden while I was away its sopped sending traffic.
running it …
-
```
During the KJ6KUV-11 flight, aprs.fi decoded the aprs packets correctly.
However, the section "stations heard by / stations which heard xxx" is missing
from the info page, see attached.
That se…
-
Hello.
I have noticed a small issue. Someone in radio range of me is sending IGATE->RF, and pymultimonaprs subsuiquently re-pushes these packets back to TCPIP.
Is there a way to reject packets with …
m1geo updated
9 years ago