-
This gave me some headache recently. I was used to merge these two libs toghether with no problems and after one year stuck with an old version of pi pico core I decided to update...
They are no m…
-
Hello,
I am trying to read ACS712 value on ESP32 board which is connected through ADS1015 pin 1.
However I cannot figure out how to use it properly since example "ACS712_20_DC_external_ADC.ino" …
-
Hello,
I am trying to use this library with my RP2040 microcontroller and ILI9341 screen with touchscreen and SD card reader.
Currently I only connected the TFT screen and touchscreen pins.
Con…
-
### Related area
ESP32
### Hardware specification
ESP32-S2 / Nano 33 IOT
### Is your feature request related to a problem?
I'm trying to get an absolute mouse working but I'm stuck.
The USBHIDMo…
-
I am trying to add support to RP2040 for an Arduino project that is commonly run on Teensy and Pro Micro boards. It's a gamepad firmware meant to run with 1000hz polling and allow configuration over a…
-
Hi UncleGrumpy,
Thank you very much for your quick response, now library issue is resolved getting below complilation error.
` In member function 'void WebSocketsServer::handleNewClients()':
C:…
-
Big thx for the library! It was maked but it has warrnings. I dont know it importatn or not. I will test it.
```
INFO ESPHome 2023.11.6
INFO Reading configuration /config/esphome/esp32.yaml...
W…
-
Hi there,
I used the example yaml file in /examples to modify my working yaml file for my Onju home speaker. Since Onju home is based on the same esp32-s3-devkitc-1 as the example yaml uses, I was …
-
If SPI beginTransaction is called for the first time, then the format is correctly set to 8 bits since this is required for the SPI library functions to work correctly.
With the latest 3.6.1 releas…
-
In the file https://github.com/earlephilhower/arduino-pico/blob/master/cores/rp2040/cyw43_wrappers.cpp
I need to override __wrap_cyw43_cb_process_ethernet, __wrap_cyw43_cb_set_link_up, and __wrap_cyw…