-
Hello all
I juste received my SKR Pro and when i compile Marlin 2.0, it compile with success but i have a lot af this warning.
Have you an idea ?
A big thanks
PS : sorry for my english
![…
-
missing the cover plate for the hotbed cables. only supplied cover plate for extruder.
-
I have a CR-6 SR with the BTT CR6 V1 motherboard and a TFT70.
I home Z so I can do a ABL. But I notice that it hits the bed to hard each time that the strut bends.
When it has finished the Home Z,…
-
Hi I tried to connect 4 **TMC5160** in daisy chain. However I could not get the motor moving. There seems to be a **SPI problem** with the TMC5160s. I have also _grounded_ the CLK pin
However I'm …
-
Good morning,
i have recently bought a 1.4 version of this board.
There are 2 fuses, 20A and 10A, i need to know if i need to change these fuses if i power the board with 24v?
Best regards.
-
I have a fresh install of vscode/platformio, and a fresh download of this repo, no changes. i hit build, and it says `fatal error: variant_MARLIN_STM32H743VX.h: No such file or directory`
i cant fi…
-
Like my header says, I am trying to compile for an skr v1.3, tft25, with bed leveling. When I compile it goes all the way to the "linking firmware.elf" then throws a bunch of errors and fails. I will …
-
Hi,
can someone tell me the PWM Pins for the Partcollingfan?
FAN0 and FAN1 is used for hotendcooling.
So i choose FAN2 for the Partcooling, but they just start working @80% and this is full blas…
-
Hi,
i wonder if it's possible to add the "ooze shield thickness wall" as an option for dual extruders printer.
I have a Cr10 Mini modified with a bigtreetech mixing extruder, and when i print i have…
-
Hello, I just finished my voron 2.4 built and went through the initial startup testing. When I was trying all the motors ("STEPPER_BUZZ STEPPER=stepper_x") and went through all the motors. I had an is…