-
Currently, I have a simple python script that opens a serial port, runs a couple of functions, and then closes the port.
```
import serial
ser = serial.Serial('/dev/ttyUSB0')
print(ser.name) #…
-
Some important details that might make this issue worth ignoring:
I'm using Debian Linux, and Chromium web browser.
Problem:
The app freezes when I click the failsafe tab. After clickin…
-
# A Description
CleanFlight not sending VFAS over Smart Port on SP Evo Brushed.
I have an SP Evo Brushed FC with built in battery monitoring running Cleanflight 2.0.2, connected to XSR Frsky taran…
-
# A - Description
GPS does not work with v2.1.0-RC1. Failed to set 'gps_provider', 'gps_sbas_mode'.
Works well with v2.0.5 version.
# B - Steps To Repeat
Install 'Cleanflight / SPRACINGF3NEO…
-
Hello, I am trying to use this package with an MWC Multiwii FC. The gy86,launch gets refused by my FC, and the betaflight_rpi_zero.launch does not publish anything other than parameters. Is the MWC bo…
-
https://github.com/cleanflight/cleanflight/blob/master/src/main/drivers/accgyro/accgyro_mpu6050.c#L91
Should :16g
-
https://github.com/cleanflight/cleanflight/blob/master/src/main/sensors/acceleration.c#L325
I can not undestand why we need judge STM32F10X.
They have the same result: acc.accSamplingInterval = 1…
-
https://github.com/cleanflight/cleanflight/blob/master/src/main/sensors/acceleration.c#L382
accelerationTrims->raw[X] = (a[X] + (CALIBRATING_ACC_CYCLES / 2)) / CALIBRATING_ACC_CYCLES;
why have " +…
-
Hi,
I was searching for Inav low battery RTH failsafe and ended up here https://github.com/cleanflight/cleanflight/issues/1711#issuecomment-305748321
So I asked in that thread about the future …
-
Hello,
Probably not a firmware issue but I thought posting here might save others time and frustration. I am using an Omnibus F4v3 for my latest build and found that my laptop will not reco…