-
On Windows 10 64-bit; PyCUDA 2015.1.3; CUDA 7.5 machine:
When calling PyCudaHandler while running CIFAR-10 example (examples/cifar10_cnn.py) line 64, the following error occurs:
- \- - - - - - - - …
ghost updated
9 years ago
-
Hello Henry,
do you build a working controller? Is there a pcb-layout available?
Many thanks for your answer
Hans
-
Some Ruida controlled devices have their bottom on the top right corner instead of the more traditional left side. VisiCut already supports the top and bottom left, but lacks support for the other cor…
-
Hello, I will be using a teensy 4.1 and 2 TMC2209 V1.3s wired directly without a shield.
For the 2209 V1.3, is spreadcycle the default mode? If not, how do I switch it?
If I just have to us…
-
I have been thinking about the issue of lack of spindle synchronization as it relates to lathe operation and I think I have an idea for smaller lathes t least. I have a 9 x 20 lathe that I also have …
109JB updated
3 years ago
-
First of all, thanks for sharing your great work.
I use the polarshield server comiled for an Arduino Mega/Ramps 1.4 configuration (with A4988 drivers installed for Y and E1)
The polargraph cotr…
-
Hello Misan,
Steppers are cheap and have much more torque than DC Motors in same size, can you add option to output Step/Dir signal?
I think it would be a great new feature.
Could you ad "bluepill"…
-
-
I use the library with an Arduino Uno. `Simple.ino` works exactly as expected. I use this pin setup:
```
#define EN_PIN 7 // Nano v3: 16 Mega: 38 //enable (CFG6)
#define DIR_PIN 6 // 19 …
-
Is that machine ok to use Bagat jadranka?