-
Hello,
I was going through the tutorials as is given in, **First micro-ROS Application on an RTOS**. However, I got a few errors. I am pasting the whole procedure started from the scratch. Please …
-
Hi,
So I had googled this project but somehow never found ya'lls github. A kind commenter on my similar (but more focused on hikers, etc...) [project](https://hackaday.com/2020/02/26/lora-mesh-net…
-
i was trying to build nuttx with Micro-XRCE-DDS but facing error during the build process
i have followed these steps
cd ~/nuttxspace/nuttx/
make distclean
cd tools/
./configure.sh nucleo-f4x1re/…
-
Why does SX1272GetPaSelect always return RF_PACONFIG_PASELECT_PABOOST?
According to the comment, RF_PACONFIG_PASELECT_RFO should be the default.
Furthermore, I believe this should be a variable tha…
-
Hello,
So I found out that the ./LoRaPktFwrd should be the command to execute the program, not ./LoRaPktFwd. But even then it outputs "Unable to open SPI device: No such file or directory". I do ha…
-
I'm porting TTGO T-Beam board to RIOT (#11418). Executing `examples/lorawan` produces following output:
```
2019-04-25 10:26:56,695 - INFO # I (37) boot: ESP-IDF v3.1-dev-961-ga255622 2nd stage bo…
-
What is the right way to organize files inside LoRaMac-node project if I want to adapt it to use with GNU toolchain and free tools?
What I want to add:
- generic arm-none-eabi GNU toolchain availa…
-
#### Description
```*_params.h``` files which usually contain
- default configuration parameters for drivers or
- board specific configurations of GPIOs and ADCs that are mapped to SAUL
are …
-
On some boards, SPI.begin() is used to set SPI pins:
```
SPI.begin(5,19,27,18);
```
Currently, this is hardcoded in the library, but it may be best to leave it for the user sketch.
https://www.th…
-
1.) Can you provide me with information on how to install this driver code.
2.) What is in the "tools" directory?
3.) Is there any configuration required for ttgo?
Thank you