-
**_Reported by Inaky Perez-Gonzalez:_**
(Platform EMSK not available on Ref Platform list)
When running testcases on EMSK, the output of this one is always broken up; I was able to capture:
```
…
-
HI, Can you add FPGA flow for all these cores.
-
utsushi (utsushi list) does not detect the DS-1630 anymore if the device is
hot-plugged.
If the device is cold-plugged (connected before boot) detection and scanning
work as expected.
Some mor…
m1027 updated
6 years ago
-
Hello,
Is it possible to push another small rtos with rocket cores to the fpga instead of riscv-linux ? The rtos in question has its own gcc.
Can an RTOS be ported on top of the BBL for the unte…
-
I am using Petalinux from Xilinx. It basically provides Yocto Krogoth in a commercial package with support for their FPGA SOCs. When I add clang I get the following:
ERROR: Nothing PROVIDES 'binuti…
-
Which baud rates are supported to the Pixhawk?
It seems like it is only possible to use 460800 which seem to create a bottleneck for logging (Ulog).
With 460800 we seem to be limited to a logging ra…
-
```
root@LEDE:~# nsjail -Ml --port 9000 --chroot /chroot/ --user 99999 --group 99999 -- /bin/sh -i
[2017-10-15T10:02:43+0000] Mode: LISTEN_TCP
[2017-10-15T10:02:43+0000] Jail parameters: hostname:'…
ebadi updated
6 years ago
-
Good Morning!
Just a quick question, how do you use the ttyS0 on the aero board.
According to this doc: https://communities.intel.com/servlet/JiveServlet/download/453901-164636/Intel_Aero_Compute…
-
sunxi-tools 1.4 doesn't install sunxi-nand-image-builder.
I'm packaging sunxi-tools for Guix and it won't install sunxi-nand-image-builder that way. Did you mean to leave it off? Or is it supposed to…
-
I am trying
i2cdetect -y -r 2
and get a response 12 at address 0x12. According to:
Intel Aero Compute Board includes BMM 150 sensor. This sensor is connected to Atom SoC via I2C interface on bus…