-
Does it make sense to implement an IR Receiver?
I have a board that has one soldered and ready at GPIO04 (board is "MagicHome LED strip controller"... has a IR variant that comes with cheap IR rem…
-
Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"
Build-Optionen wurden verändert, alles wird neu kompiliert
C:\Users\admin\Documents\Arduino\Fernbedinung\Fernbedinung.ino:2:22: fatal erro…
-
### Version/revision of the library used
v2.3.2 (also tried earlier versions eg 2.3.0)
### Expected behaviour
Tried to run the IRrecvDumpV2 program unchanged also IRrecvDemo
1. Compile and run t…
-
Is anyone working on an IR Receiver module? I see the IR proximity and distance sensors, but I don't see anything about IR Receivers. As far as I can tell, they work completely differently (proximit…
-
Hi Marc,
I tried to turn your firmware on ESP-WROVER-KIT but I got the following error.
ATTENZIONE: la libreria RobotIRremote dichiara di funzionare sulle architetture [avr] e potrebbe non essere …
-
This should depend on [Infrared4Arduino](https://github.com/bengtmartensson/Infrared4Arduino) only.
Should be submitted to the Arduino library manager.
Possibly it it possible to make a version…
-
**433MHz Wireless Transmitter MX-FS-03V**
**Diode L…
-
La librería no tiene documentación ni un ejemplo de uso mínimo.
Sería bueno complementar la información con esto si no es mucho pedir.
Buen trabajo!!
-
It used to work before, now I get:
```
11:07:11 CMD: IRsend {"protocol":"NEC" ,"bits":32 ,"data":1286815935}
11:07:11 MQT: stat/sonoff-livingroom-light/RESULT = {"IRSend":"NoPROTOCOL, BITS or D…
-
I'm going through and updating the libraries to our new build process and to turn on lint. Here is the process:
1. Copy `.pylintrc` from the cookiecutter repo into the new repo.
2. Add this to `.g…