-
Hi there,
I would like to connect a GY-2561/TSL-2561 sensor to my Sonoff S20, but I can't seem to get it to work. It communicates through I2C. Can someone tell me if it is supported (can't find it in…
ghost updated
6 years ago
-
Hi, I'm using a wemos d1 mini with tasmota and added some sensors. I publish the data over MQTT and read it from Home Assistant, mut in this case, I don't know why, the device doesn't publish the data…
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
rt400 updated
6 years ago
-
Hi papa,
kannst du bitte die beiden Sensor-Files für DS18B20 und BH1750 mit aufnehmen?
Ich musste die .h nach .txt umbenennen, um sie hier anhängen zu können...
Danke!
[Bh1750.txt](https://githu…
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x ] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x ] Searched the problem…
-
I would like to connect BMP280 to Sonoff Basic and want to avoid additional soldering to GPIO4..
Connected SCL to GPIO1, SDA to GPIO3, VCC and GND.
Disabled SerialLog/Enabled SerialLog.
But does no…
-
This issue lists the status of all tests for the [Release Candidate 1 of the 2019.07](https://github.com/RIOT-OS/RIOT/releases/tag/2019.07-RC1) release.
Specs tested:
- [x] [01-ci](https://github.…
-
Hello team,
please add the support for the I2C Sensor BH1750 Light sensor Illuminance.
I use the following settings on Sonof Basic:
GPIO14 = DHT11 --> Works and shows in IOBroker
GPIO01= 05 I2C SC…
Ichda updated
6 years ago
-
Hi,
I'm using a Sonoff 4ch Pro r2 with FW 6.1.1. When i restart the sonoff, relay1("POWER1":"ON") is always switched ON. So i tried different combinations with the PowerOnState and the PowerRetain wi…
-
Hey,
would it be possible to add support for this One-Wire Light Sensor?
This is the device:
https://www.aliexpress.com/item/Smart-Electronics-TEMT6000-An-ambient-light-sensor-Simulate-the-light-in…