-
- current size is only legible from very close -- should be double or triple the current size
-
## 2023-11-20 (Mon)
```
$ brew update
Updated 5 taps (tailwarden/komiser, minio/stable, cduggn/cduggn, homebrew/core and homebrew/cask).
==> New Formulae
action-validator ghc@9.6 …
-
Hey there (again) :)
I was just about to solder one of these and then realized that the PCB is missing the usual dot indicators to tell about the orientation of the ICs. I saw that the silkscreen/g…
-
Hey,
so since I have one of your CH32V003FUN boards, I wanted to try the USB there. It's missing the resistors connecting the USB, so I beeped them out:
![ch32v003fun-brd](https://github.com/cnloh…
xsrf updated
9 months ago
-
Hi, I'm not sure how to put in the layer stackup/sequence to get the main PCB manufactured from JLCPCB.
![image](https://user-images.githubusercontent.com/1266473/138296341-7c213823-c65b-476f-bcb7-…
-
Can probably take view of silkscreen from Eagle, and then add some color. Call out especially:
- Power/GND/Signal of A0-D7
- GND on each of aux. and power input connectors
-
* [x] https://rusefi.com/s/uaefu
* [x] rev A
* [x] "always looking for C/C++..."
* [x] spell out "WBO SWD"
* [x] spell out "USB" next to 5 pin USB
-
Hello,
There are some Raspberry Pi Pico clones, which are cheaper and have usb-c connectors, such as these:
![image](https://github.com/hrvach/deskhop/assets/2063957/01079f7b-6846-4655-8a13-b5ba…
-
Hey! I have currently finished building the main macro-pad module. I have put the firmware code on the board, and I have checked my soldering a few times now. I cannot get the RGB to light up (The OLE…
-
WT32-ETH01 is a versatile controller which supports WLED firmware.
It has inputs and outputs
Supports at least 8 pixel outputs, relay output, button inputs and has a built-in ethernet controller to …