-
What if do some refactoring and place some board preferences as global variables?
I mean this:
// microstepping is 1 / (1
-
Hello,
I use XBee Pro 868 with JavaXBeeLibrary in API Mode 2.
I need to control two stepper motors and a linear actuator.(But possibly need to use any more).
You know some Stepper Motor Driver chip…
-
This failure normally happens after 6+ hours, but one test failed at 2.5 hours. I've tried 3 different models sliced with both S3D and Slic3r. expected print times are 10.5-14 hours to complete. It ha…
-
Hello,
I am using GRBL 0.9 with an Arduino Uno and Protoneer Shield.
I bought a few new A4988 and DRV8825 drivers and I noticed some strange movements on all Axes.
Description of the problem:
Lets s…
-
If we want to operate the drivers with higher voltage (DRV8825 can do up to 45V), the caps should do that. IIRC, the current ones are 35V but we'd need 50V or 63V types here - see if that footprint ca…
-
This is a strange issue, and I suspect it might not be grbl itself, but let me explain it and see what you think.
I am running 0.9i nad using grblweb for control.
If I issue the following commands (…
-
There are some bugs in the stepper on the last patch. You should update it. This is also now much faster.
https://github.com/Wurstnase/Marlin4Due/commit/1c7857b7a0b9acf2b38a22ea1238bd4a4db567b4
-
So, I had a project (electronics enclosure) for my ShapeOko, and on one test run with a new material I noticed a very curious positive Z drift. What threw me is that I've been using the same electroni…
-
Hi I'm new here,
First I want to thank all developers for the excellent work that has been done till now.
I noticed that an interface such this
![cop5511cnc_1](https://cloud.githubusercontent.com/asse…
ghost updated
10 years ago
-
I have RAMPS-FD board with six channels - six stepper driver that i can control. This channels is X, Y, Z, E0-MOT, E1-MOT, E2-MOT. X, Y, Z to control for movement, and E0-MOT to control the extruder. …