-
RGB NeoPixel LED in hardware-check is not flashing if the crate is upgraded to the latest 0.48.* version. I have commented out the rest of the code but LED flashing and narrowed down the issue to th…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Has…
-
Hi
Please can you advice where the SPI pins are.
On the PCB it has printed SCK=io5, MOSI=io27, MISO=io19
How do I physically connect to these pins? I can't see any pin outs on the board with th…
-
This board from Classy Walk hoverboard and has a GD32F130, FORTIOR FD6287T GA1015 and a NCE01P13K 1PKL2. It's marked with OLSZ 0L20190703-V4.1
## Master
2. Load a JPG image sequence
3. Hit the Make DCP button
What is the expected output? Wh…
-
Do you know how to make the Fysetc Mini 12864 to work with the TH3D-EZBOARD LITE using their unified firmware?
-
### Question
I am trying to use C6 devkit as a zigbee dimmable light bulb.
I can successfully power on/off the led , and set level
But when I try to change color modes, it fails.
I am trying to co…
-
### Describe the project you are working on
This applies to all 2D projects I have worked on in the last 3,5 years, so ever since I started working with Godot.
### Describe the problem or limita…
-
Closing [#126](https://github.com/revk/ESP32-Faikin/issues/126) to start again as far too long - let's start again.
# Where are we?
We have details of low level timings and codings, and dumps of…
-
I tried to compile a working program with FastLED and Arduino UNO/Pro Mini on MKRZero and it doesn't work. I become the following warning:
#warning "No pin/port mappings found, pin access will be sli…