-
Приветствую!
Продолжаю разбор полётов здесь.
Оказалось, что всё работает и на 19.07.4. Просто надо было после всех настроек передёргивать питание роутера, а не делать reboot в консоли. Пока до меня …
-
### Describe the bug
dpkg: error processing package initramfs-tools (--configure):
### Steps to reproduce the behaviour
```
$ sudo apt update
$ sudo apt -y full-upgrade
Reading package lists...…
-
Can't seem to get it to finish creating the necessary nodes.
Running Lineage 18.1 as of yesterday. Samsung A5 (2017)
[*] ConfigFS seems to be mounted...
[*] ...and usb_gadget is available
[!] us…
-
Bought this from Amazon UK ([https://www.amazon.co.uk/dp/B083QJ87JJ]) works in uhubctl but does NOT kill the VBUS. Tried connected to both a USB2.0 and USB3.0 port on host machine, no joy. Tested usin…
-
Hello all, I am using Orange Pi 5 board and the OS I am currently running is OrangeOS but the problem is it don't support camera module OV9281 and v4l12. So I want to ask is their any default support …
-
Hi,
I am trying to power the board from 5v using the VBUS pin (5v) and GND, however the board does not turn on. It works fine using USBC, and I am turning GPIO38 HIGH on setup to enable the screen.…
-
Hi. I am in the process of debugging why USB (in particular the stm32f4 `usb_serial` example) won't connect on both Windows and Linux. I am using the STM32F401CC based [Blackpill board](https://stm32-…
-
I build process it successfully.（Armbian-unofficial_24.5.0-trunk_Zc-328_jamm…
-
The schematic shows pins 1/2 are connected to VBUS. VBUS is also connected to the USB-C power pins.
With USB-C not connected, can you please confirm whether or not it is safe to power the board wit…
-
During file transfer (rsync) over a powered USB 3 hub from sda to sdb, the kernel disconnects the USB channel after a few minutes. The board needs be rebooted.
The failure occurs with the first me…