-
Tried to flash the Generic DHT11 ESP01s sensor and after flashing, I don't know how to configure it. There is no WiFi broadcast-ed from the device. Any help?
I have flashed via esptool using ESP to…
-
### Hardware:
Board: D-duino-32
Core Installation/update date: 17/dec/2017
IDE name: Arduino IDE 1.8.5
Flash Frequency: 80Mhz
Upload Speed: 115200
### Description:
The…
srolf updated
5 years ago
-
Hi Xose,
I am a big fan of your work and use espurna to control Wemos D1 mini boards in my home connected to few lights and plugs.
I am trying to make the Wemos D1 mini work with a single channe…
-
Last night my LCD went all crazy, i had to turn the unit off and back on. Not sure what i can do to give more info on it.
![img_0244](https://user-images.githubusercontent.com/1016996/44723512-36751…
-
I manage to break my install, when I updated some libraries (in Ardiuno and espurna).
I took a fresh clone of espurna and all libraries listed in the wiki for usind Arduino IDE.
I'm getting the f…
-
Please bear with me if I overlooked something, but I'm still quite new to Tasmota.
I have a couple of ESP8266 (ESP-12F) which I've flashed with Tasmota sonoff.bin respectively version 5.14.0 and 6.1.…
-
I can't seem to get this display to work.
https://www.waveshare.com/product/modules/oleds-lcds/arduino-lcd/4inch-tft-touch-shield.htm
I'm using a Wemos D1 Light
It uses a ILI9486 controller, and I'…
-
Hello Jose, first of all thank you for your perfect work.
I'm installed epsurna 1.12.4 on my wemos d1 r1 (old version from 2015).
I connected ds1820 to gpio4, led to gpio 13 and button to gpio 5 a…
-
I have a Sonoff 4CH expanded with a needed 5 Relay. Working fine so far.
But there is no HueEmulation for the 5th relay in Web Interface visible.
![image](https://user-images.githubusercontent.com/2…
-
Hey,
this one is also great, small and more precise than dht22. And it has a wemos shield as well: https://wiki.wemos.cc/products:d1_mini_shields:sht30_shield
**Notes:**
Wemos' provided library…