-
Hi there,
I am trying to configure an Uno with SX1272MB2xAS board but I can only go as far as
```
Starting
Packet queued
183: EV_JOINING
```
The set seems to work fine with ABP.
I have tri…
-
Hello,
I have the gateway up and running. It is forwarding the packets sent by the node to the TTN server and I can see them in the console. However, it seems that when the node sends a confirmed p…
-
The join code for eu868 seems to use 6 channels; the ardunio-lmic code uses three. Per @tftelkamp, these are not part of the eu868 channel plan for LoRaWAN 1.0.2, and were removed in advance based on …
-
I have this test sketch for Lora (further not relevant btw) with the following code:
`#if defined(**AVR**)
# include
# include
# elif defined(ARDUINO_ARCH_ESP8266)
# include
# elif defined(**MKL26Z…
-
Hi,
I installed ic880a-gateway as shown and I am testing it using an arduino uno node with an SX1276.
Sending informations from my node to the TTN works fine but from ic880a-gateway to the connected…
-
working with the sx1276 based rfm95 chip I have no issue using the UNO but when working with the Arudino 101 I get the following error:
```
Starting
FAILURE
/Users/rob/Documents/Arduino/libraries/ar…
-
I am learning about handlers and I would like to ask how is it possible to implement OTAA joining. I have tried ABP, in this case I created a link and I can see the frames from my device in /admin. Bu…
Kralg updated
7 years ago
-
It is really helpful for debugging :-)
-
const lmic_pinmap lmic_pins = {
.nss = 4,
.rxtx = LMIC_UNUSED_PIN,
.rst = LMIC_UNUSED_PIN,
.dio = {2, LMIC_UNUSED_PIN, LMIC_UNUSED_PIN},
};
won't work on Moteino Mega LORA: Sketch kee…
-
I tried to use this library to add pinChange interrupt capability to an existing sketch. When I simply added #include into my main sketch, the build failed with multiple duplicate references.
Afte…