-
Hi Biqu ,
Could you please share the source for this firmware ?
BIQU-B1/Firmware/2021-04-28/Motherboard-210428/Motherboard-SKR 2-210428/
Thank you
-
Just replaced a SKR Mini e3 V1.2 with a SKR Mini e3 v2.0, now BLTouch isn't working.
If I flip the Z-stop pins, black wire top and white bottom, the BLtouch lights up solid blue LED, no self test, …
-
Thanks for the help in advance.
I'm trying to use TeachingTech's Marlin version (with BLTouch enabled). After a few hours reading because I could compile it (VS Code and PlatformIO) I finally got i…
-
khalil nurullah here. I was one of the users on the old google plus groups that updated the firmware for 3ku delta to marlin 1.1.6 - 1.1.9 when k chang didnt not. I shared my work before.
I have mo…
-
Hello, first, sorry for my bad english, but I've some issues i don't understand.
I've got a 3d-Printer with the BTT SKR Pro V1.1
I've installed 4x TMC5161 and configured them as followed:
Confi…
-
I am trying to configure marlin bugfix 2.0.0 ( both from bigtreetech github repo an marlin github repo ).
If I configure like this ;
#define X_DRIVER_TYPE TMC2208
#define Y_DRIVER_TYPE TMC2…
-
It is nice there is a socket for it but how do you get it to work?
-
I have Mega 2560 R3 and ramps 1.6. Tried to upload and showed a lot of errors.
-
As the title reads, it seems to flash fine but the BIN file persists. This is using different 128 mb cards from BTT and both with 2004 LCD and 12864 LCD.
Same behaviour if powered through USB or ex…
-
The core of the ESP8266 ESP-07S module in the slot BTT SKR2 VB boards - the printer is not recognized in the WIFI network.
What should i do? Please provide information step by step to change this.
M…
qulet updated
2 years ago