-
Filter header information out from the running, startup configs such that get_config and load_replace_candidate are complimentary operations.
i.e. you can do get_config on running and then go and i…
-
##### SUMMARY
The connection to the remote NETCONF device is lost forever after a while when looping over the same ```netconf_rpc``` operation with some delay using ```ansible_network_cli_ssh_type: p…
-
Can we add support for ubiquiti_edge please?
-
##### SUMMARY
When diffing ACLs using the session configuration such as ansible_XXXXXXXX the diff is not representative of the change it will make. The module is still in the ACL sub command and that…
-
# Information about my configuration:
oxidized (0.29.1, 0.26.3)
oxidized-script (0.6.0)
oxidized-web (0.13.1)
ruby 3.0.2p107 (2021-07-07 revision 0db68f0233) [x86_64-linux-gnu]
gem version - 3.…
-
Snort 3 is not dropping the packets even after the rule specifies to block packets. It is running in inline mode and shows *drop* but the packets are being sent however. Any help is appreciated.
-
**Criteria 1: Valid Python Code**
Score Level: 4/4
**Criteria 2: Implementation of Project Requirements**
Score Level: 4/4
Comment(s): Nice job implementing the requirements of the project…
-
-
##### SUMMARY
I use Ansible 2.11 to connect to an Arista Switch (7050) eOS v 1.18.1 using the eAPI.
I used the notes at [this page](https://docs.ansible.com/ansible/latest/network/user_guide/platfor…
k-304 updated
2 years ago
-
```
What steps will reproduce the problem?
1. honeyd -f /etc/honeyd.conf --webserver-port 9100 --webserver-root
/usr/local/share/honeyd/webserver/htdocs/
2. honeydctl -v
3. honeydctl> list
What is th…