-
See http://www.thingiverse.com/thing:100850
I included a graph i drew with dimensions. Apologies for amateuristic explanation.
The GCODE slic3r 0.9.9 generates (also older) says object in Y direction…
-
First - thanks for the great Slic3r program, it works realy great!
To me the skirt feature looks a little bit inconsistent with dual extruders. But it could also only be me because I'm new to all this…
-
Slic3r reported the STL to be manifold. It reported an error in a pop up dialogue box after exporting a partial gcode file. Below are my settings and the error.
Here are my settings:
# generated by S…
-
I'm trying to create an airfoil geometric model using gmodel. I first create a loop, add a spline from the points defining the airfoil to the loop, create a square, then remove the loop from the squa…
-
There is no option for setting the brim distance. Printing the brim lets say 0.1mm away from the object (and maybe use some rigid filling) would make it easier to remove the brim from the finished obj…
-
The preview of the layers in Slic3r's GUI show what appear to be correct walls but the Gcode generated jumps around and skips sections. Use print settings Simple (bracelet), Filament: Taulman 618 Nyl…
-
1.2.0-exp trying to print 50mm Bridge Torture Test from Thingiverse:
http://www.thingiverse.com/thing:12925
Unlike in 0.9.9, Slic3r correctly detects the perimeters that are part of the bridge, and u…
-
I'm slicing for a 0.80 mm nozzle. If I have a custom extrusion width of 1.0 mm a 2.1 mm ring has 2 perimeters. In the upper cylinder portion of the model there's a small gap but it works. If I change …
-
Windows 7 64-bit
Slic3r 1.2.2-dev (Updated 2014-12-07th)
http://a4jp.com/3d-files/bugs/2014-12-08th-9-04-am-for-github-config.ini
http://a4jp.com/3d-files/bugs/block.stl
The skirt preview is missing…
-
I'm absolutely loving the new toolpath preview feature - it's a big timesaver when sanity checking generated prints before starting them.
I did notice, however, that brim and skirt do not appear to r…