-
MMIX is a virtual ISA designed by Knuth for use in [TAoCP](http://www-cs-faculty.stanford.edu/~uno/taocp.html). It's worth looking at, as an example of a relatively modern ISA designed with great care…
-
Looks like they all have `{{header`
- `MATLAB}} / {{header|Octave`
- `Icon}} and {{header|Unicon`
- `Delphi}}/{{header|Pascal`
- `Delphi}} and {{header|Pascal`
- `Pascal}} and {{header|Object`
- `SQL}…
grant updated
8 years ago
-
MMIX signed integer division rounds using _floor_ rouding, and signed integer remainder uses the sign of the denominator. This makes the signed integer remainder operation a true modulus operation. An…
-
I have been having issues with the board orientation. In my WarpQuad, I have the board mounted upside down - so the rear of the board is still the rear, and the front is still the front, I just rotate…
-
Hi,
Tested on 1.9, virtual current sensor and capacity drawn in GUI or "fuel" on FRsky telemetry (D4RII + taranis) worked great but only virtual current meter works on 1.10. Capacity drawn stay at 0…
-
Tested your latest naze hex form your dropbox today. Tried the ALThold mode on my 180 quad. Board: naze32 Full. When I put the quad in ALTHOLD it stays for a while but then starts slowly sinking to th…
-
On my Naze32 it seems that min_check is not honored and it's impossible to arm by stick without breaking a prop or two. I didn't have the problem pre 2.5.0.
```
# dump
# version
# BetaFlight/NAZE 2.…
-
I connect cleanflight through usb and give maximum motor throttle at motor page to set max for esc. Next I connect the battery but immediatly the motor slider automaticly revert to zero. It seems the …
-
Hi,
when I configure a gimbal for tilting the camera, I have to connect it on PWM1 or PWM2 an my Flip32. The motors have now be connected to PWM3-6.
My Problem is, the Flightcontroller is directly c…
-