-
Can someone check that there are control outputs on pins 5-8 on Fixed Wing Conventional aircraft. A Flying Wing using servo outputs 3 and 4 works OK but not for a Elevator, Aileron L, Ailron R, Rudder…
-
HI New to INAV, attempting to set up Nav ALTHOLD, I can arm and fly without issue when I put the quad into Althold mode it immediately goes to full throttle and stays until I change out of atlhold wit…
-
If you use a Taranis radio you may be interested to know that a collaborative effort is taking place to understand and use the telemetry that is available from a Taranis TX serial port. See https://gi…
-
The reported value appears to be a the raw 8-bit number with a percentage. Ie: a true RSSI of 99% shows up as 254%. Lower values appear as 248% etc.
-
In some cases above certain throttle value accelerometer starts to read garbage rendering inertial modes unflyable:
![image](https://cloud.githubusercontent.com/assets/11059099/17834772/1264506a-6793-…
-
### Description of problem or feature request
Stroke and shadow of .ass subtitle does not render correctly.
I heard about HandBrake and want to give it a try. Batch process is way better than Me…
-
I've been trying for days to get the GPS working with my Omnibus F4 V2.1 clone purchased from Banggood. https://www.banggood.com/BF3_1_5-Omnibus-F4-V2-Flight-Controller-STM32-F405-MCU-Integrated-OSD-B…
-
Hi. Ive been struggling a little with Inav and the setups on a Matek405 wing. Ive pretty much sorted most issues but something is happing I cannot understand or fix. Everything in Manual mode works fi…
-
## Current Behavior
If I use my trim on my transmitter it's totally impossible to fly a fixed wing any more. The problem is that if you move the stick to fast to the side where you also moved the tri…
-
For immediate help, just ask your question on one of the following platforms:
* [Telegram channel](https://t.me/INAVFlight)
* [Facebook group](https://www.facebook.com/groups/INAVOfficial)
* [RC …